Removal,onestarfitness.net,Cup,$17,Sleeve,J-46904,Installer,Artudatech,2Pcs,J-,/uk/tools-workshop/home-garden-leisure/gardening-tools-equipment/,Automotive , Replacement Parts , Fuel System,Injector Removal,onestarfitness.net,Cup,$17,Sleeve,J-46904,Installer,Artudatech,2Pcs,J-,/uk/tools-workshop/home-garden-leisure/gardening-tools-equipment/,Automotive , Replacement Parts , Fuel System,Injector $17 Artudatech 2Pcs Injector Sleeve Cup Removal Installer J-46904 J- Automotive Replacement Parts Fuel System Artudatech 2Pcs Injector Sleeve Cup Installer Removal J- J-46904 Max 83% OFF Artudatech 2Pcs Injector Sleeve Cup Installer Removal J- J-46904 Max 83% OFF $17 Artudatech 2Pcs Injector Sleeve Cup Removal Installer J-46904 J- Automotive Replacement Parts Fuel System

Artudatech 2Pcs Injector Sleeve Cup Installer Removal J- J-46904 Max 83% Lowest price challenge OFF

Artudatech 2Pcs Injector Sleeve Cup Removal Installer J-46904 J-

$17

Artudatech 2Pcs Injector Sleeve Cup Removal Installer J-46904 J-

|||

Product description

Removing and installing EPA07
1. Drain Engine Coolant before removing injector tube.
2. Injector tubes may be damaged if excessive force is used during removal.
3. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove.
4. Check injector tube for cracks or defects. Replace if damaged.
5. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line.
6. For cleaning injector tube interior sealing surface, a chemical solvent may be used.
7. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove.
8. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool.
9. Using injector cup removal /installation tool install injector tube in injector bore.
10. Tighten injector tube to torque specs.
11. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder.
12. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads.

Fitment:
For Detroit Diesel 60 Series, alternative to J-46904 amp; J-48824.
--Use J-46904 for screw-in stainless cups 240-1039 23538840 240-1035 23533148.
--Use J-48824 for screw-in stainless cups 240-1045 23534745 23538829.

Artudatech 2Pcs Injector Sleeve Cup Removal Installer J-46904 J-

Shop By Department